Tebis.v4.0.R7.sp2

In Tebis, all multi-axes machining operations on milling, turning and turning/milling machines as well as with robots can be very easily planned and calculated without collisions. Integrated machine kinematics ensure automatic creation of homogeneous toolpaths with tilt direction checking and low tool wear.

Multi-sided machining with positionable axes
Whether a part is to be milled simultaneously on multiple sides with positionable axes or by 5-axis simultaneous milling always depends on the specific machining task, the complexity of the part, and machine kinematics. In many cases, multi-sided machining is faster than 5-axis simultaneous machining and even yields better surface quality.

2.5D multi-sided machining
The tool can be very easily positioned for any number of levels to machine 2.5D ruled geometries. This feature, combined with feature-based automated 2.5D machining, allows you to generate a omplete 5-sided machining operation quickly and with little effort within a single NC program.

3+2-axis multi-sided machining
3+2-axis milling programs can be very easily generated in Tebis: The procedure is always the same whether programming 3-axis or 3+2-axis programs. Another advantage: The tilt direction can always be adjusted interactively, enabling you to remain flexible despite the high degree of automation.

3+2-axis multi-sided machining of undercut areas
When carrying out multi-sided machining of undercut areas, you can use key and ball cutters and achieve very high surface quality with the shortest possible tools. The part can be completely machined in a single setup. This machining method is also suitable for 5-axis simultaneous milling of undercut pockets and breakthroughs as well as for flow passages and impellers.

5-axis simultaneous avoidance milling
5-axis simultaneous machining in the release direction is very convenient: You can create 3+2-axis NC programs without tilt direction with no extra effort. Simultaneous 5-axis programs are calculated fully automatically. The tool angle is optimized – and always taking the machine kinematics into account.

Product: Tebis.CADCAM.v4.0.R7.sp1
Version: tebis v4.0 r7 sp1
Supported Architectures: x64
Language: english
Supported Operating Systems: Windows 7even or newer
Size: 1DVD