Software training,tutorials,download,torrentOPEN MIND has always offered an innovative CAD/CAM solution whose CAD functionalities are seamlessly linked to CAM programming. This leads to enormous time savings in workpiece preparation.
This alone makes it clear that CAM without CAD is no longer an option today. From version 2024, hyperMILL® now combines CAD and CAM under one name (instead of hyperCAD®-S), thus consolidating “CAD for CAM” for the future. The familiar CAD functionalities remain the same, only their names change.
CAD
Import model-based definition
hyperMILL® supports the import of PMI and MBD data in various formats such as STEP, CATIA V5, SOLIDWORKS, Creo, and Siemens NX. A model-based definition (MBD) is assigned to faces, and PMI symbols are assigned to dimensions, tolerances, and surface finishes. This data can be evaluated with the help of the AUTOMATION Center for faster processing.
Create faces from grids
hyperMILL® now offers the option of generating both open and closed faces from a variety of grid curves. Even non-intersecting curves are taken into account within a tolerance, allowing faces to be generated effortlessly, even in the most complex areas.
Creation of three-dimensional electrode paths
Two-dimensional machining is no longer sufficient for some erosion processes. With hyperMILL® Electrode, you can now generate machining paths along a 3D curve with simultaneous C-axis rotation. Retract movements are automatically created in the opposite direction to ensure an efficient machining process.
Electrode generation for open surfaces
Deviations in faces and tolerance values often make it very time-consuming to create electrodes. hyperMILL® Electrode simplifies this process by allowing electrodes to be created even with open or overlapping faces.
Optimized Deep Hole Drilling
We have revised the deep hole drilling process and developed a new strategy. A user-friendly interface makes programming easier, with all process-relevant parameters now clearly displayed on the new process tab. The new strategy offers all the functions required for safe and reliable deep hole drilling. Coolant and dwell time can now be defined for each stage or phase of the deep hole drilling process. New functions also make it possible to integrate a chip break into the drilling process.
Thanks to the various parameters, the drilling process can be perfectly adapted to your machining. This increases process reliability. Optionally, programming can be carried out independently of the stock, which is a particular advantage when there is extensive model data. In parallel with the new strategy, we have introduced a new type of tool, namely, the single-lip gun drill. The simulation includes a precise collision check and detailed visualization of the stock removal.
CAM
New default values for filleting toolpaths
• The default value for toolpath filleting (Fillet radius) now always refers to the Diameter of the tool used. In
addition the Fillet all toolpaths function is enabled by default. This applies to subsequent cycles:
2D Milling
• Pocket Milling
• Contour Milling
• Contour Milling on 3D Model
• T-Slot Milling on 3D Model
• Chamfer Milling on 3D Model
• Inclined Pocketing
3D Milling
• Profile Finishing
• Z Level Shape Finishing
• Plane Machining
• Arbitrary Stock Roughing
• Z Level Finishing
3D Advanced Milling
• Complete Finishing
• Automatic Rest Machining
• Corner Rest Machining
• Cutting Edge Machining
• Rib / Groove Machining
• Form Pocket
5X Cavity Milling
• Profile Finishing
• Z Level Finishing
• Rest Machining
• Corner Rest Machining
• Z Level Roughing
• Radial Machining
5X Surface Milling
• Top Milling
• Iso Top Milling
• Shape Offset Finishing
• Tangent Plane Machining
2D and 3D machining – Improved performance for NC generation
• The time for NC generation for 2D and 3D machining without activated optimizer has been improved.
3D Plane Machining – New pocketing algorithm
• The new algorithm ensures faster machining times on the machine and a more smooth toolpath layout
especially with a big stepover (ae).
• (1) Old algorithm, (2) new algorithm
Product: Hypermill 2024 update4 OPEN MIND
Version: 2024
Supported Architectures: x64
Language: english、Multilingual
Supported Operating Systems: Windows10 even or newer
Size: 1DVD