Software training,tutorials,download,torrentThe Fastest and Most Accurate CAM Software on the Market
CAM-TOOL is a five-axis-control-machining-center compatible, high-end CAD/CAM system with a hybrid CAM engine (Polygon and Surface Calculation). This Hybrid capability enables direct machining to be applied to materials with a high degree of hardness. In addition, CAM TOOL provides a superior surface finish, longer tool life, reduced machining time and finishing time.
The Difference is in the Tool Path Calculation
Most CAM systems calculate their tool paths using what is referred to as a triangulation mesh. This means putting a virtual net over the model and using the intersecting points to calculate their tool paths. This mesh creates inaccuracies in the NC code, and in turn, your part. With CAM-TOOL’s surface calculation, your NC code is directly offset from the surfaces to ensure smooth, accurate tool paths that are true to the model. This higher accuracy NC code increases tool life, surface finish and produces more accurate parts.
Reduce your operating costs
Competing CAM software that utilizes Triangular Mesh Calculation results in breakage of the spindle and tools, over-cutting, shorter tool life, substantial polishing, cutter marks on the machined surface and molds that do not fit within the tolerance level.
CAM TOOL’s unique Surface Based Calculation for tool paths results in a superior surface finish, longer tool life, reduced machining time, prevention of machining accidents, and reduced finishing time.
True Surface Offset NC Data allows machining to the tightest tolerances in the industry!
5-axis Conversion Function
Creates 5-Axis Simultaneous tool paths by adding the information about tool direction to 3-axis tool paths. In converting tool paths, “smoothing control” adjusts the tilt axis and rotation axis to make the Machine Tool move more smoothly. It is also possible to have the tool tilt gradually before the point where the tool direction changes rapidly. These functions provide the highest quality finished surfaces.
Automatic Interference Avoidance
Collision of the Tool, Chuck and Holder with the shape can be avoided by controlling the tilting axis automatically. It change the tool direction gradually to avoid a drastic change of tool direction and also minimizes the cutting mark.
Simultaneous 5-Axis Cutting Mode
- Swarf Cutting
- Z-level Undercut Finishing
- Undercut Curve Control Along Surface
- Undercut Re-machining
- Base Surface Rough Cutting
- Base Surface Side Finishing
- Base Surface Bottom Finishing
Version: 15.1
Supported Architectures: x64
Language: english/Japanse
Supported Operating Systems: Windows 7even or newer
Size: 1DVD