64 bits compatibility for OptisWorks Studio.

New Functionalities
Optimization and tolerancing targets for color and barycentre.

ANSI/IESNA LM-63-2002 standard support.

ANSI/IESNA LM-63 Type A standard support.

"Customer Portal" toolbar.

New OPTIS License Manager.

OptisWorks Studio: New SolidWorks functionalities (User interface, Features, Sketching, Parts, Assemblies, ...).

Ray number for direct simulation can be greater than 2 Giga Rays.

Multithreading performance.

Sampling has been set by default to "5x5" for interactive source's faces.

Display of barycentre and color values in the Results Manager tree to be able to be selected as targets.

A default name has been set up when creating sources and detectors.

"Uniform sampling" appellation for "Polar Intensity Detector" depending on the polar intensity detector.

The "Tessellation" icon availability has been improved.

A warning is displayed when deleting a sketch used for a detector definition.

The SolidWorks error message when running a direct simulation including no existing folders has been improved.

A warning has been added when launching a simulation with spectral sensors having a non optimal wavelength sampling.

While using the Light Expert option, the Virtual Photometric Lab is now always on the foreground.

Fixed bugs
The ray files source's definition with two lines and a point has been solved.

The edition of a surfacic source included in a part from a different configuration has been solved.

The "Air_OW" ambient material has been replaced by the "Air" when running a ray tracing.

The crash when defining an optical property with internal and external materials applied on a surface has been solved.

The deleting of the detector related to a duplicated source has been solved.

When defining a detector from a rectangular surface, the disappear of this one from the "Default part preferences" tree has been solved.

The update of detectors contained in different assembly has been solved.

When defining an intensity detector, the rename has been solved.

With the 64 bits version, the save of a new illuminance detector with one point and two lines has been solved.

When selecting a faces for the Ray Tracing Filtering, a message is displayed if a required face is selected as a included face. The inverse also works.

The luminance simulation with one ray file with weight and sensor gathering has been solved.

The rays emission when a surface source of Emittance (Variable type, XMP) is applied on an Emissive face which is build from an extrusion has been solved.

The n value included in cos n theta has been expanded to negative values (CAS-01855-CXAN7S).

The tolerance option linked to OPTIM1 option has been solved (CAS-01900-D466YB).

The use of the optimization with LM2 and OD packages has been solved (CAS-01837-DB1CPU).

The illuminance detector is now available for the OD package (CAS-02116-0TNFZU).

When answering "Yes" at the end of the optimization, variables are now replaced by the found values with the optimizer.

When "Save as" a system, close and reopen the software, the fact that detectors were not displayed has been solved (CAS-01785-B3WRIC).

"OptisWorksDetectors" object has been added.

"OptisWorksFaces" object has been added.

"GetDetector" function has been added to "OptisWorksInstance".

"GetOptisWorksFacesDetector" function has been added to "OptisWorksInstance".

"IIlluminanceSimulation2" interface has been added.

"IIlluminanceDetector" interface has been added.

"IIntensityDetector" interface has been added.

"ILuminanceDetector" interface has been added.

"IPolarIntensityDetector" interface has been added.

Grating Editor, DOE and Thin Lens Editor: Only available with the LM1, LM2, OD or LP package.

XMP post-processing and Intensity post-processing: Only available with the LM2 package, the MIL, LDR or LE solution.

Rendering Surface Editor and Simple Scattering Editor: Only available with the LM1, LM2, VE1 or VE2 package, or with the MIL, LDR or LE solution.

"Getting Started Optimization Light Modeling".

"Getting Started Optimization Visual Ergonomics".

"Getting Started Optical Design".

"Getting Started Binoculars".

"Getting Started Optical Optimization".

"Getting Started Laser Propagation".

"Getting Started Optimization Colorimetry".

"Customer Portal" toolbar.

New OptisWorks API objects and interfaces.

"Direct simulation" page.

"Creating an "Interactive Source" page.

"OptisWorks feature manager" page.

"Polar Intensity Detector" page.

"OptisWorks toolbars" page.

"OptisWorks menus" page.

"Assembly preferences" tab.

"Material" page.

"Surface Contribution Analyzer" page.

"Known Problem" page.

French SolidWorks documentation included in the OptisWorks Studio setup.

Set up
OptisWorks Studio includes SolidWorks OEM SP3.

"Directory" has been renamed "Optical Results Directory" in the "Assembly preferences/Result file" tab.

"Set intern material" and "Set extern material" menus and tooltips have been renamed as "Set internal material" and "Set external material".

The "Loading" message displayed when moving the layer's slider of the Virtual Photometric Lab has been replaced by "Processing".

Inactive icons have been rebuilt.

Contextual menu has been added for all types of detectors.

It is now possible to use the "Delete" button to delete results in the OptisWorks tree.

Progress bar while luminance simulation has been rebuilt.

Number of rays has been replaced by number of turns for luminance simulation.

"About" window contains now detailed information related to the software version and the computer platform.

No comments: